The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Subaru bucket seats & a console without any new holes to my floor

SeniorVerde · 11-04-2014, 02:32 PM

I took the whole enchilada out again and did a similar trick for bolting up the back of the console only I just used angle iron with nuts welded under the back holes I drilled to mount the console. when it was still in the truck, I tested the opening and closing of the console lid to make sure it cleared the tank and the seats.

11-04-2014, 02:32 PM	#8
SeniorVerde Registered User Join Date: Dec 2010 Location: Carnation, Wa Posts: 142	Re: Subaru bucket seats & a console without any new holes to my floor - How I did it I took the whole enchilada out again and did a similar trick for bolting up the back of the console only I just used angle iron with nuts welded under the back holes I drilled to mount the console. when it was still in the truck, I tested the opening and closing of the console lid to make sure it cleared the tank and the seats.