The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dunce79 · 11-05-2014, 07:04 PM

This was insane, I know. better ways to do this I'm sure. I read on here that patch panels for the later model bedsides fit.. Well, they kinda do. The rear lower corners are close enough but not quite long enough. I made it work but if I do it again it would probably be easier to just try and fab a patch out of one sheet.

I did brace this side when replacing that big section around the middle.

11-05-2014, 07:04 PM	#6
dunce79 Registered User Join Date: Sep 2014 Location: Fremont, NE Posts: 154	Re: Dunce's 59 Fleetside build This was insane, I know. better ways to do this I'm sure. I read on here that patch panels for the later model bedsides fit.. Well, they kinda do. The rear lower corners are close enough but not quite long enough. I made it work but if I do it again it would probably be easier to just try and fab a patch out of one sheet. I did brace this side when replacing that big section around the middle.