[95 S_Trucker]

All the bucket seats from 95-00(GMT400) will be interchangeable

You will not see a difference in leg room

There will not be any holes for the inside tracks to bolt to. There will be dimples on the floor where the holes need to be drilled.

You may need to remove a heat shield on the pass side under the cab to gain access to the bottom of the floor pan.

Use heavy duty 2" washers or make some steel plates to reinforce the floor where the inner tracks mount.


You will need to completely remove the dash and take apart the wiring harness to get all the factory power window/mirror/lock wiring. It would be easier to get some diagrams and make your own harness.