Quote:
Originally Posted by skymangs
I have an 84 frame at the shop. I'll do some measuring after the holiday.
|
Here is my math on my frame. 84 s10 std cab long bed 117"
Front edge of oval hole to rear edge of 5/8 hole, 43 1/4"
Add 2 1/8" from oval to rear of front stand, total 45 3/8"
Remove 10 1/2" to get to front edge of rear stand 34 7/8"
This should be 33 1/4", where did I go wrong.
I do understand, tack them on, put cab on, confirm engine space, make corrections as needed, pull cab, finish weld, but I would like to avoid any suprises. Great thread, thanks so much for the help.