The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Gippetto · 12-04-2014, 03:32 PM

I am doing my 47 GMC with the center shackle. I retained the stock frame and rebushed the shackel and replaced the rear bumpers so I am OK there.
What I need is a picture of the center shackle sheet metal enclosure from inside the truck. Mine was cut out (butchered) with possibly a hatchet. There is not enough metal left to figure out what to fabricate to close the hole up. It lookes like, maybe, the missing cover may have been removeable.

I appreciate any help here.

12-04-2014, 03:32 PM	#6
Gippetto Registered User Join Date: Aug 2009 Location: Woburn, MA Posts: 127	Re: Cab Mounts for a 1948 I am doing my 47 GMC with the center shackle. I retained the stock frame and rebushed the shackel and replaced the rear bumpers so I am OK there. What I need is a picture of the center shackle sheet metal enclosure from inside the truck. Mine was cut out (butchered) with possibly a hatchet. There is not enough metal left to figure out what to fabricate to close the hole up. It lookes like, maybe, the missing cover may have been removeable. I appreciate any help here.