Re: 72 Blazer frame tails
They stick out approx. 1.5" beyond the rear body panel below the tail gate. I know because I had to extend mine due to being cut off. I added about 1.25" and my rear bumper is too close to the body.
I have about 1/8 inch to spare between the bumper and quarter panels. I would have liked to have a little more room but it wasn't worth the effort to relocate the holes.
If you have the tails you could mount them to your bumper/brackets and then align the bumper to the body at a point that you find acceptable, weld them and call it good.
__________________
Don aka Rocket_Man
72 K5 Blazer 454 CI
2002 Honda VTX 1800C
|