The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

David623 · 12-12-2014, 09:21 AM

I have put a 1999 5.3 Silverado engine and trany into a 1972 Jimmie. From what I see the existing exhaust manifolds will not work without modifying the frame, from research on this website Trailblazer, Corvette, Camaro manifolds will work which is the best choice? Also I am dealing with relocating the A/C compressor, Kwik performance I think has that problem solved, sent them an email for more information. And finally I have put an Aeromotive fuel pump in the new gas tank I need to find a check valve to complete the fuel line.
I will post some pic soon, just put the rebuilt tub back on the frame.

12-12-2014, 09:21 AM	#1
David623 Registered User Join Date: Oct 2012 Location: Plymouth In. Posts: 100	Exhaust manifold; vent check valve I have put a 1999 5.3 Silverado engine and trany into a 1972 Jimmie. From what I see the existing exhaust manifolds will not work without modifying the frame, from research on this website Trailblazer, Corvette, Camaro manifolds will work which is the best choice? Also I am dealing with relocating the A/C compressor, Kwik performance I think has that problem solved, sent them an email for more information. And finally I have put an Aeromotive fuel pump in the new gas tank I need to find a check valve to complete the fuel line. I will post some pic soon, just put the rebuilt tub back on the frame.