The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aotte1** · 12-13-2014, 10:44 PM

Two closer photos of the coil bracket being used to clean up the engine a little. It is a GM bracket from a 1960s SBC. It attaches to an intake manifold bolt. I used the last bolt one on the right side..

You can also see the grommet on the fire wall behind the coil where the original wiring was removed and replaced with wires from the MSD box.

The original 1986, V6 computer was removed that controlled/adjusted the engine timing.

Les

12-13-2014, 10:44 PM	#408
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 1986 Chevy C10 SWB Step Side Two closer photos of the coil bracket being used to clean up the engine a little. It is a GM bracket from a 1960s SBC. It attaches to an intake manifold bolt. I used the last bolt one on the right side.. You can also see the grommet on the fire wall behind the coil where the original wiring was removed and replaced with wires from the MSD box. The original 1986, V6 computer was removed that controlled/adjusted the engine timing. Les Attached Images Last edited by aotte1; 12-13-2014 at 10:54 PM.