[vidman]

Set the cab on the frame for the 2td time.It was around 50 today, so spent some time on in the garage.. had to check some tranny clearances because i found out that my low hump did not work for me..[ replaced it with a high hump] I also wanted to check to see if i had room for my 9" booster and it looks like it will be OK, will have to tweek my pass side header heat sheild and add the driver side sometime this weekend but things are looking good. some of the pics dont show it but the clearance is about 5/8 of an inch on the drivers side and a strong 3/4 of an inch on the pass side from the valve covers to the firewall..