Re: 70 GMC in progress.
Thanks Man! Much apreciated.
First pic here shows the perches dialed in and bolted up solid,
Last few pics show the lowering blocks removed because the truck sat too low, and they were made of plastic.
The 308 rear end installed, the overload springs put back in place...
And me dreaming about running huge tires on one of my trucks...... They would have to be run on a truck that has trailing arms, the leafs get in the way of em.
I had to change the yoke on the pinion so it would work with my U joint on the drive line, still need to switch out the axles to the 6 lug, Should have it all done tomorrow,
Replace cab corners next, Then cut the bed floor out and mount bed, then cut out or remove inner fender wells in front so it drops all the way down,
Happy Hollidays
Last edited by 64chevtruck; 12-26-2014 at 01:04 PM.
|