[99 to Life]

thank you guys, so here are some pics of the bed thats just about all way on. you can see I coated the areas that will be covered with some chassis saver and on the outsides I did chassis saver and herculiner.

the tubing frame inside the bed is what the bed wood will sit on. this frame will unbolt and come out, but... the bed wood will be able to slide right off of this, so any maintenance work can be easily done. for example, draining the water traps to the air ride system. I would have had more bed depth had I not ran a disc brake set up. but, I wouldn't have been able to run my gas filler were it is, so I guess it all worked out.

got the fuel filler neck almost done. so glad I didn't spend 50 bucks on 6" worth of hose and an adapter. Found this jetski filler tube online for like 13 bucks and just so happen to be dead on with what I needed, just had to cut it.

should have some more air ride plumbing soon, hoping to have it plumbed and wired in the next two weekends, so it should all run on its own very soon. then back onto some interior wiring. once I get the pws hooked up and air ride done, its a full on driver. now its just a bunch of little things to finish.