The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68basket · 02-05-2015, 08:36 AM

Thanks guys! I did coat the lobes and the bottom of the lifters with the lube provided by the cam. I went ahead and added the break in lube. I will drive the car to the exhaust shop and do the alignment then drain it all out.

02-05-2015, 08:36 AM	#10
68basket Registered User Join Date: Dec 2012 Location: louisville, ky Posts: 480	Re: Did i screw up my cam break in? Thanks guys! I did coat the lobes and the bottom of the lifters with the lube provided by the cam. I went ahead and added the break in lube. I will drive the car to the exhaust shop and do the alignment then drain it all out.