The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 62 c20 power steering / 235

vince1 · 02-05-2015, 12:13 PM

I looked at mine from a 67 and aside from it being upside down from yours it is more compressed (about 3/16") resulting in a noticeable bead in the rubber. Is yours in the assembled state? If it were a little more compressed I think the crack would close up and if cleaned with acetone or MEK maybe a little black silicone would hold it together. Other than that maybe its time to cruise the junk yards.

02-05-2015, 12:13 PM	#39
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,166	Re: 62 c20 power steering / 235 - need some smart people. I looked at mine from a 67 and aside from it being upside down from yours it is more compressed (about 3/16") resulting in a noticeable bead in the rubber. Is yours in the assembled state? If it were a little more compressed I think the crack would close up and if cleaned with acetone or MEK maybe a little black silicone would hold it together. Other than that maybe its time to cruise the junk yards.