The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Marty68 · 02-09-2015, 08:16 AM

i have most all the parts, in a box on the shelf, 6 bolt disks, calipers hoses pads, spindles.... no tie rod ends or ball joints or bearings.
i think however 2.5 spindles plus 2" springs is too low.

02-09-2015, 08:16 AM	#38
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: engine years. options i have most all the parts, in a box on the shelf, 6 bolt disks, calipers hoses pads, spindles.... no tie rod ends or ball joints or bearings. i think however 2.5 spindles plus 2" springs is too low.