Re: tn66step
here is a few pictures of our progress, frame is just about finished, 4 wheel disc brakes, 2 1/2 drop spindles 5 inch rear drop springs and 1 inch drop springs in the front. 5 on5 lug pattern with helos maxx 18x9 all the way around. engine is a 350 4 bolt main, flat top pistons, comp hyd cam 480/496 lift demon 750 on a endurashine performer rpm intake, msd dist. crane roller rockers, comp push rods, plans are to go ahead and set the truck up for fuel injection which will include a frame mounted tank with walbro in tank pump with return which we will regulate while we run the demon for now, enjoy the pictures.
|