[Already Gone]

Originally Posted by gmachinz

Your harness kit is shipping out Monday for you! As requested, this relay upgrade kit also incorporates a headlight-on reminder buzzer harness circuit so if you have the ignition off and lights are on, the buzzer will sound. This mounts under the dash since you'll need access to a switched ignition source, a ground and included is an adapter pigtail to allow you to keep a factory appearance while integrating the signal wire for the buzzer from the tan lead in your headlight switch. This is a really trick setup-I think you'll like it!

All wiring of course is j1128 so its rated for underhood use and In use a flame/heat resistant Delphi loom for an updated appearance and it will maintain a higher level of performance over stock or OEM style aftermarket headlight wiring kits. The side marker and turn signal leads you'll need to splice to your existing-there are so many option for lighting pigtails I leave that up to you. Headlight grounds are 10ga so poorly grounded lighting is a problem no more and they secure @ the factory locations on the core support.

Let me know if you have any questions! I'll PM customs shipping info once it leaves.

I have just one question. Is there simple follow along written instructions with the harness?