The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Low Elco · 03-02-2015, 04:05 PM

Good lookin' work, nice job on the wiper motor. I just marked and yanked our column and cut it.16 years without backup lights and NSS was long enough. Wasn't bad at all, took maybe 30 min with a worn down cutoff wheel. I just drilled a 7/16 hole in the inner with a Unibit and filed the tab a tad, bingo! Works great.

03-02-2015, 04:05 PM	#1
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Project 69SWB Good lookin' work, nice job on the wiper motor. I just marked and yanked our column and cut it.16 years without backup lights and NSS was long enough. Wasn't bad at all, took maybe 30 min with a worn down cutoff wheel. I just drilled a 7/16 hole in the inner with a Unibit and filed the tab a tad, bingo! Works great. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!