Re: Gmc pauls poly tank
The copper 90 elbow can be seen in the pic attached to the upper end of the 1 1/4'' fuel hose. Had to have it expanded just a very small amount to fit the GM van filler. I had to re-solder the van filler to "re-clock" it to the correct angle to make the fill hose route smooth with no kinks. As mentioned in the post I made, NO fill problems at all. Hope that helps with your mod.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
|