Re: Restoring Rusty
Diagram of the two plugs the white one and the black one that plug in to the ignition switch and what they do
WHITE CONNECTOR
Pink - Start & Run (connect this to the ignition) ... Pink is ignition, pink is ignition, pink...
Purple - Start (connect this to the starter solenoid)... Purple is starter, purple is starter...
Red - This is the Battery connection bringing power into the switch. Red is usually power, red...
Brown - Accessory & Run (Accessories....)
BLACK CONNECTOR
Red - This is the Battery connection bringing power into the switch.
Orange - Run (connect this to power anything in the Run state) I also have a Dark Brown / White Stripe wire going here, not sure what it's for
Light Brown / Black Stripe - Start position switches this lead to ground
Last edited by Gregski; 03-31-2015 at 03:15 AM.
|