|
Re: Project "Man Pedal"
I had a set back, seems the input shaft bearing was bad and gave up the ghost. So, I decided to find another tranny and swap it in. I picked one up with bell housing and shifter for $200 last weekend. Me and my sons got it installed today, took about 4 hours. Works great, put about 30 miles on it. Now I have another side project some day, rebuild the SM465. But first I need to finish the interior.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.
1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|