Re: Post Your Straight Six Pics!
Quote:
Originally Posted by dell72
I have a question about the I-6 exhaust manifold bolts. On my 69 C-10, the very front and rear bolt heads are missing. I initially assumed the bolt heads had broken off over time. After looking through multiple pictures in this thread, I've noticed others are like this. Are they supposed to be like this or have the heads just broken off with time.
|
That's normal.
In the stock application the L6 studs work OK. If you're hanging headers, you'll want to back out the studs with a big ViceGrips turning counterclockwise. Then you have some nice bores 3/8-16 x <1" deep. Threaded studs 3/8-16 UNC on one end, and 3/8-24 on the other work real good to hold the header ends down.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not.
Last edited by '68OrangeSunshine; 04-06-2015 at 03:45 AM.
|