I picked up the "poor man's serpentine kit" which uses two 6-rib belts instead of one, but is significantly cheaper (March Performance P/N# 22061)
So I started pressing the P/S pump pulley on while loosely mounted...
And realized there is no way I'm going to be able to get this bolt in with it on the truck
![](http://i160.photobucket.com/albums/t188/danielsmithsd/IMG_20150415_194926_zpsl5icrpjr.jpg)
So off it comes and I need some shorter bolts... hold that until tomorrow I guess.
This may be overkill, but I'm doing hydroboost
And I picked up a PSC remote reservoir, pump housing and bracket (PSC P/N# SR2545-10K, SR146H-6-10, MR18K)
Going to be a tight fit
Stock photo of bracket which DOES NOT fit. I might go back and order one of
these, which I didn't see before. Their site is really hard to navigate.
And lastly, my next proximity issue