The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DWilbur · 06-11-2015, 04:10 PM

I have seen some members use cherry picker with 4X4 frame on top of the lift that would pivot on the lift run the 4x4 frame through the door opening and lift the cab off then roll the frame out from under it. the lift should be center in the cab front to back and side to side.

06-11-2015, 04:10 PM	#161
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: 1972 K10 Disabled Veteran First Build I have seen some members use cherry picker with 4X4 frame on top of the lift that would pivot on the lift run the 4x4 frame through the door opening and lift the cab off then roll the frame out from under it. the lift should be center in the cab front to back and side to side.