Quote:
Originally Posted by 57larry
I did a search and boy am I confused. I have a 68 1/2 ton with a 5 lug rear. Is there any kit out there for rear disc brakes that you don't have to pull the axles? Maybe just cut the backing plate off. Could someone list all the parts I'll need to complete this swap. Thank you, Larry
|
To change from drum to disc brakes you need to remove the backing plate for the drum brake setup. It will not fit over the axle flange. It's a bit easier to just remove the axles but you might be able to cut the backing plate off with a 3 in grinder and a cut-off wheel. It's a forging, though, so expect a tough job. Once that is done, the CPP disc kit bolts tight on. No need to remove the axles to get it assembled correctly once the backing plate has been removed..