Re: 72 K30 Build
Mrs. 7dee2 is pretty happy with the yard for now so time to get the springs mounted. We started by flipping the frame over. Since the frame is bare this should make things go much easier working the hangers upside down.
The front core support hangers did surprise me as they didn’t seem to be close enough on the Longhorn frame to utilize the factory holes at all. With some work they did get close enough to send some 3/8 bolts through. I’ve decided to punch everything over to 7/16 for a tighter fit and to resolve the slight mismatched holes we ended up with.
Also I should mention the hardware used is only for mock up.
|