[dinnut]

Super 73 I'll give you as much info as I can while I'm at work today. I can get the rest of the info tonight.

200 lb springs on the coilovers. Qa1 part # DD501
I have the springs setup with very little preload. 12" long spring.

truck weighed 2500 front 1500 rear less than a year ago and not much has changed since then.

I need to verify rear shock settings tonight.
I can measure lower control arm bolt tonight. It's on a 2.5" drop spindle.
I had a front spring prior to this that sat on the bumpstops and recently switched to these to get it off the bumpstops. This was a long travel high stored energy spring but could not get the ride height right with it.