The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Super73 · 07-23-2015, 05:12 PM

1400lbs..
12.5" compressed - 19.5" extended

Spanner is turned up almost all the way plus I have a 1" spacer between the spring and spanner.
Shock has roughly 75% compression available.
With a 57/6.75" ic it squats

I am going to try changing ic to be a bit shorter and higher in hopes to separate the chassis with the radial. Likely going to need to remove the spacer in the shock to allow a higher percentage of available rebound.

07-23-2015, 05:12 PM	#22
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Need help with truck 60' 1400lbs.. 12.5" compressed - 19.5" extended Spanner is turned up almost all the way plus I have a 1" spacer between the spring and spanner. Shock has roughly 75% compression available. With a 57/6.75" ic it squats I am going to try changing ic to be a bit shorter and higher in hopes to separate the chassis with the radial. Likely going to need to remove the spacer in the shock to allow a higher percentage of available rebound. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 Last edited by Super73; 07-23-2015 at 05:23 PM.