|
Re: Cherokee Front Springs
Dang my luck go figure..... I have a set of front and rear springs out of a yj that i used the rear springs for lowering springs back in the day before going coilover rear. I also have the Front/ rear springs i just took off my 2013 JKU 4-door from a lift kit i just installed on it, but no Cherokee springs....crap! I wonder what the spring rates on the cherokee,...JKU springs may work, i think ill try it. I will let yall know how they work out.
__________________
'71 LWB c10-" WORK" in progress
385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall
2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better)
2013 best 7.39
2014 best-7.38
New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage
|