Quote:
Originally Posted by knomadd
You can get an adapter from 3/8 to 7/16 from Oreilly's. Ask for Edelmann Part No. 2858430. You'll need to check to make sure your fitting is 7/16, and if it isn't you'll want to cut it off and reflare the line for a standard fitting to use the adapter.
|
Thanks for the info.
Your fitting info is correct. However, you should use the longer rod with the booster and not the bullet. Although it may work, the smaller rod can actually fall out of the Master and leave you without brakes. Car Boss may chime in with a story about this. Have no idea when using hydro boost.[/QUOTE]
This is what I was afraid of. I've been researching the compatibility of the CPP booster and Wilwood master for 2 months. The only thread I could find where it was discussed was by Chad(CC69RAT) who got his feelings hurt and left the board. So I couldn't ask him what he did. So you're my lone resource
So what length of rod, and where did you get it? Also, I'm guessing regular thread sealant works for the plug?