The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1987 GMC V1500 Sierra Classic LS swap/build

NastyBuzzard · 08-28-2015, 07:05 AM

Worked on the truck until about midnight again. I have about 1/2 of the wiring soldered and shrink wrapped!

I also put on the shocks. Does anyone know what size NUT IT TAKES FOR THE REAR BOLTS ON THE FRAME FOR THE SHOCK MOUNT? Apparently I lost those

I also drilled holes in the floor for my seats. I still need to do the holes for the console.

I am having problems with getting water in the engine and for it to cool like it is supposed to.

I think a temporary solution is to mount my electric fans and run them with a switch just to avoid any blown head gaskets or anything like that.

08-28-2015, 07:05 AM	#433
NastyBuzzard Registered User Join Date: Oct 2013 Location: Saluda, SC Posts: 1,276	Re: 1987 GMC V1500 Sierra Classic LS swap/build Worked on the truck until about midnight again. I have about 1/2 of the wiring soldered and shrink wrapped! I also put on the shocks. Does anyone know what size NUT IT TAKES FOR THE REAR BOLTS ON THE FRAME FOR THE SHOCK MOUNT? Apparently I lost those I also drilled holes in the floor for my seats. I still need to do the holes for the console. I am having problems with getting water in the engine and for it to cool like it is supposed to. I think a temporary solution is to mount my electric fans and run them with a switch just to avoid any blown head gaskets or anything like that. __________________ 1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF 2020 1500 Silverado 3.0 Babymax 2002 2500 Silverado- 6.6/ Allison 2010 CTS V- The "NastyBuzzard" 1979 Trans Am - Eventually getting 6.0/T56 swap with boost