Up for sale is a complete Magnacharger MP112 supercharger system with a matching LS Simple Accy Drive.
I switched directions with the engine combo, and now have an LSA setup for it. this kit was originally designed for the 4.8/5.3/6.0 pickup trucks and the truck style Accy drives. This supercharger has about 10-15K miles on a non daily driven 5.3 truck.
This setup will make 425-450 rwhp on a stock 5.3 with the installed 3.4" pulley. With the 3.0" pulley and a cam swap, 500+ rwhp is more than attainable!
Here is what comes with-
- Magnacharger Truck/SUV style MP112 Supercharger system with built in water intercooler
- Magnacharger air/water heat exchanger for in front of radiator
- Magnacharger Water Cooling tank, pump, lines etc
- Magnacharger Truck accy drive belt tensioner and bracket (not used with LS Simple kit).
- Comes with a 3.4" pulley (stock accy drive only belt included) installed (Makes 7-9 psi on stock 5.3-5.7-6.0)
- Includes New 3.0" pulley, will make 9-12 psi from what I've been told.
- Includes Magnacharger Fuel Rails and 42#/hr injectors
- Misc coolant sensors, hoses, bolts etc
- Also included with this kit is a BRAND NEW LS Simple Accy drive system. This system will drive the following-
- Stock Truck or car alternator up high as shown (alt not included)
- Stock truck Power steering pump (includes new pulley also)
- Uses a Stock LS1 car waterpump with 3/4" spacers (not included)
- High mount AC compressor like Vintage AC as shown (pump not included)
- Tensioners, brackets, bolts, spacers, idlers are ALL included as shown.
Complete system is
SOLD