The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 09-25-2015, 12:50 PM

For the transmission do a search I'm sure there are plenty. For the dash you can go here and see what ever you need. Check the links out.

http://67-72chevytrucks.com/vboard/f...sprune=-1&f=24

http://67-72chevytrucks.com/vboard/f...prune=-1&f=111

Real men cut the dash and make the ride that much more pleasurable!

I for the life of me don't know what started all this about cutting the dash other than someone long ago did a hack job on one. That being said that doesn't make cutting the dash a bad thing. Just do it right and all is good.
You lower a truck you change the seats you change the motor out and you personalize it to make you happy. Cutting the dash is no different than any other mod you do to your truck.

09-25-2015, 12:50 PM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 68 chevy c10. newbie technical question? For the transmission do a search I'm sure there are plenty. For the dash you can go here and see what ever you need. Check the links out. http://67-72chevytrucks.com/vboard/f...sprune=-1&f=24 http://67-72chevytrucks.com/vboard/f...prune=-1&f=111 Real men cut the dash and make the ride that much more pleasurable! I for the life of me don't know what started all this about cutting the dash other than someone long ago did a hack job on one. That being said that doesn't make cutting the dash a bad thing. Just do it right and all is good. You lower a truck you change the seats you change the motor out and you personalize it to make you happy. Cutting the dash is no different than any other mod you do to your truck. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.