Quote:
Originally Posted by Xeen
You will notice that there is "L shaped" double plating on the inside of the frame rail that only covers the inside and bottom of the rail just under the rear suspension crossmember where the upper shock mount is located that only extends approximately 6 inches out from each side on a 1/2 ton, however on the 3/4 ton it extends much further which strengthens the frame to make heavier bed loads and towing possible.
Both the 1/2 ton and 3/4 ton have the same "plate" on the bottom exterior of the frame, that is the spring mounting plate.
|
Got it loud in clear sir _THANKS ALOT!
