The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Already Gone** · 10-02-2015, 07:35 PM

I am installing a tach dash and have an original tach wiring harness I am going to use. I have the firewall part figured out and ran the tach wire up and along the trough as shown in the picture. My question is there seems to be about 18 inches more tach wire than I need to connect to the coil. Is this normal or is there somewhere else it attaches other than the coil? A picture of how it comes out of the trough and to the coil would be great.

10-02-2015, 07:35 PM	#1
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,075	Original Tach Harness Routing I am installing a tach dash and have an original tach wiring harness I am going to use. I have the firewall part figured out and ran the tach wire up and along the trough as shown in the picture. My question is there seems to be about 18 inches more tach wire than I need to connect to the coil. Is this normal or is there somewhere else it attaches other than the coil? A picture of how it comes out of the trough and to the coil would be great. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021