The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

99 to Life · 10-21-2015, 01:28 PM

I was almost gonna put some spacers on front, but decided not to. I'm using an s10 steel wheel so I don't know the offset. I used the speedway tubular arms 8" for uppers. used stock lowers. I didn't dehump the lowers or notch the rear frame. So that makes for the body mounting a little lower like around 3". gives you good bed depth. I did get poly bushings for the lowers. they were like $75.

10-21-2015, 01:28 PM	#29
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: 51 chevy 3100 5 window build I was almost gonna put some spacers on front, but decided not to. I'm using an s10 steel wheel so I don't know the offset. I used the speedway tubular arms 8" for uppers. used stock lowers. I didn't dehump the lowers or notch the rear frame. So that makes for the body mounting a little lower like around 3". gives you good bed depth. I did get poly bushings for the lowers. they were like $75. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com