Yes, my D52 brackets are designed to accept the Wilwood dual piston calipers.....just as shown in the pics.
Your front rotors could be 1" thick or 1.25" thick. I do not know what you have. On the front you will want to run the Wilwood dual piston D52 calipers with the 2" diameter pistons.
Quote:
Originally Posted by Gmcbroken
So with your bracket I can run that setup on the rear. Is the front rotor the same thickness? Will the d52 caliper with 1.25 diameter pistons bolt up to the front as well with no problem? Or is the rotor different then 1.28 or bolt pattern different?
|