The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RodsGreen10 · 10-31-2015, 04:18 PM

Also on drivers side I had to pull the 3 back plugs so the header would slide in. Also make sure after you get header up in place put plugs back in and torque them before you bolt header up. If not you won't be able to get to the plugs. I have angled plugs and still couldn't get a torque wrench on them or plug socket. Just a heads up if someone else gets these.

10-31-2015, 04:18 PM	#338
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" Also on drivers side I had to pull the 3 back plugs so the header would slide in. Also make sure after you get header up in place put plugs back in and torque them before you bolt header up. If not you won't be able to get to the plugs. I have angled plugs and still couldn't get a torque wrench on them or plug socket. Just a heads up if someone else gets these.