The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

enaberif · 11-10-2015, 09:35 PM

To get JB weld to flatten down you need at least 60 or 80g to break down the bulk then you can use 120 or 220.

You would be doing this either you would have gone with bondo or welding unfortunately its just that jb weld is better than bondo but not as good as welding.

11-10-2015, 09:35 PM	#2345
enaberif Registered User Join Date: Jan 2009 Location: Calgary, AB Posts: 1,181	Re: Restoring Rusty To get JB weld to flatten down you need at least 60 or 80g to break down the bulk then you can use 120 or 220. You would be doing this either you would have gone with bondo or welding unfortunately its just that jb weld is better than bondo but not as good as welding.