Quote:
Originally Posted by tlorber
Finally a bit of forward progress to report. This is the new cab mount system that AD Engineering has put together. I bought the prototype from Robert and got it installed. His goal was to make it a complete bolt in, but I will be burning in certain areas in order to reinforce.
He made this so that the cab can be installed for stock height or lowered by about 3". Since I am using drop spindles in front and lowering blocks in rear I am using the "stock" setting.
http://67-72chevytrucks.com/vboard/i...attach/jpg.gif |
I hope your cab is still off the frame as I need your help. Please check your mail box as I have sent a PM. Thanks, Clay