The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

moody38 · 01-01-2016, 12:02 PM

Gregski and 73Kay--

As an alternative to the regulator sliders, you might consider something like this--

http://www.homedepot.com/p/Prime-Lin...-100183882-_-N

I found them when I ran into the same problem with the back window on a Bronco. I did have to grind down the roller pedistals and drill a hole in the regulator arm, but that was no big deal. They've held up fine for 10 years now and are available locally at most hardware stores. If they can handle that back window, I'm sure door windows would be no problem.

01-01-2016, 12:02 PM	#2486
moody38 Registered User Join Date: Dec 2015 Location: NE Fla Posts: 1	Re: Restoring Rusty Gregski and 73Kay-- As an alternative to the regulator sliders, you might consider something like this-- http://www.homedepot.com/p/Prime-Lin...-100183882-_-N I found them when I ran into the same problem with the back window on a Bronco. I did have to grind down the roller pedistals and drill a hole in the regulator arm, but that was no big deal. They've held up fine for 10 years now and are available locally at most hardware stores. If they can handle that back window, I'm sure door windows would be no problem.