The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BossHogg69 · 01-02-2016, 10:25 PM

Follow up:

I ended up being loyal to Classic Parts, since I've always had good luck with them. The arms I received are of very nice quality and would be fine to just bolt on. However, me being me, I hit them with a buffing wheel and some white buffing compound and then polished them by hand with some MAAS metal polish (it's the shizzle!!). Of course, they are made offshore, but they look very nice, and hopefully they hold up. I don't know if the O.E.R. ones are made here or not. Maybe davepl can let us know. If they are, it's worth the extra $$ to me.

01-02-2016, 10:25 PM	#8
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Who makes the nicest/best wiper arm? Follow up: I ended up being loyal to Classic Parts, since I've always had good luck with them. The arms I received are of very nice quality and would be fine to just bolt on. However, me being me, I hit them with a buffing wheel and some white buffing compound and then polished them by hand with some MAAS metal polish (it's the shizzle!!). Of course, they are made offshore, but they look very nice, and hopefully they hold up. I don't know if the O.E.R. ones are made here or not. Maybe davepl can let us know. If they are, it's worth the extra $$ to me. Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!