Quote:
Originally Posted by tjsblazer
Passenger seat hold down shown in pic in post #18.
Is the front bumper OE or aftermarket? Condition ?
Drivers outer seatbelt. I am looking for one where the plastic boot isn't split in black.
The metal clips that bolt on the firewall for wire harness routing.
Condition of gaskets on the fuel filler. Both the thin flat one where it screws to the inner quarter panel and the lower thick on where it goes through the bed floor.
Condition of Wiper transmission arms.
W/H clips along the Drivers Frame rail.
Thanks.
|
Seat hold down is sold with seat brackets
Front bumper is OE does have a bend under the DS light but I think it is very fixable let me know if still interested
Seat belts in this one are not original may have what you need but will have to dig it out.
I took a picture of the firewall not sure which clips you are talking about
Rubber gaskets 10 for the pair the round one was glued on so small pieces come off when removing it from the filler neck.
Transmission arms splines look good bushings on stems look good and the bronze bushings look good. 20
Just realized what you where asking for wiring harness I have some loose how many do you need will post a picture so we are on the same page.
Plus shipping on prices