The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**First c10** · 01-05-2016, 08:09 PM

I don't want to have a bolt or screw through the firewall for the fuse block so I used 1/4-20 x3" countersink machine screw. I used a half inch nut as a spacer to tighten the counter sink bolt to create my own counter sink in the metal. Then ground down the counter sick head and welded it in.

01-05-2016, 08:09 PM	#456
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" I don't want to have a bolt or screw through the firewall for the fuse block so I used 1/4-20 x3" countersink machine screw. I used a half inch nut as a spacer to tighten the counter sink bolt to create my own counter sink in the metal. Then ground down the counter sick head and welded it in. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!