[Builtlikeatank634X4]

What I have going on is I replaced me 1 speed motor with a 2 speed with attached washer pump .. My 63 schematic of wiring doesn't show me anything for a 63 with a 2 speed or washer pump so I would like to know if it's possible to make it work with my existing wires.

I've looked at the diagram that was sent and hooked it up but all its done is blow fuses. There are 4 connectors on the motor and 2 on the pump. I connected the 2 wires from the harness to the center connectors on the motor and have both speeds but if I attach wires from the end motor connectors to the pump I blow the fuse.

It's raining now so I'm giving it a break plus I gotta get more fuses