[74CustomK20]

All the spring bushings are out!! W00t w00t! Also got the front springs in, with new poly bushings. I did notice they were more narrow than normal front springs, so 3 washers on each side cured this and centered the springs in their mounts. The rear of my c30 springs are good, but the front half is a different size than the rear... but the front c30's are the same as both of my k20 springs??? Lol weird. Anyway hoping by the weekend to have all of my suspension on, and I can start taking the body off the old frame to set off to the side and transfer the lines and chassis parts over... Pretty fired up!

Another note, hoping you 4x4 guys can help. This is my first project vehicle of this magnitude, and first time taking on a project let alone a 52" swap. One of these pics is my shackle angle, and clearance to the frame. Can you guys shed some light on if this will work?