[Hatch83]

Here are a few images of the back end starting to come together. The read diff is now mounted along with the shocks. bed/rear fenders are now properly mounted as well. We had the same issues so many people have in that the shocks are sitting slightly too high for the stock bed set up. Instead of going with the option of boxing them into the bed wood, decided we wanted the wood to be completely undisturbed so we went with the option to raise the wood itself a couple of inches higher.

Fuel tank is also mounted, steve had to move around the fixings and moved the hole (technical term! as we are planning to have the neck coming out the side of the fender) -after making the decision the raise the bed wood as well i think steve is planning on bringing this a tiny bit higher as it is sitting a tiny bit low at the moment!