[QUOTE=SS Tim;7354312]To clear things up this is from GM dated January, 1972
"
New Removable Top Assembly (RPO CC3) 1972 Blazer
A new (simplified construction) top is being offered to supplement the currently available (RPO CB8) top for Blazer models. The new top (RPO CC3) is a single skin design with three exposed interior roof rib reinforcements running from side to side, whereas the RPO CB8 top is a double skin design with inner roof panel lines running front to rear. Part numbers for the two tops are as follows:
Tim - thanks for sharing this info. I had a guy from a local repair boat shop come by the house to take a look at my top. In the photos below I drew black annotation marks to call out, or confirm if these are the roof rib reinforcements running side to side? We were discussing these and neither of us could determine if this was factory or if this was a repair that happened at some point in time.
Thanks!
Mike
This is the driver front side. They have the same matching lines on the other side as well.
Passenger backside