Jimbosprint, If you haven't figured this out already. There are two straight head screws on each drum (seen in post #336). If you remove those two screws your drums will slide off without taking the axle out or anything else apart. But, like others have said if they haven't been off in a while you made need to use some force but they will come off. I have the Dana 60 in my '70 C20 and did my rear brakes recently. Thought I would pass the word. Great write up on the work you have done.
Bryan
Quote:
Originally Posted by jimbosprint
It's a Dana 60 rear end. I was told the drum and hub are one piece and the axle has to come out.
|