I finished tacking in the floor reinforcements and anchor plates today. There is still finish welding to be done, but for now I am just going to clean things up and shoot some primer and clear coat to keep things clean. Once I have all the floor repairs done, I will lay the cab on the back wall and take care of the finish welding, then coat the bottom of the cab floor in Monstaliner. They have a product that is similar in color to the original turquoise paint that was on the truck from the factory. This will be the color I am going back to, so the Monstaliner under the floor and inside the fenders should be a good match, help to protect the metal, and cut down on some of the noise inside the cab.
I also took another picture of the brake pedal in relation to the steering column. There is actually quite a good gap between the column and the pedal shaft.
-Joe