Quote:
Originally Posted by robnolimit
No need to notch the frame, as long as you haven't cut up the stock upper coil pocket (upper bag plate mount) there are no problems.
|
Ah right I was thinking about the No Limit kit, which has clearance issues if the crossmember is pancaked or set up into the frame iirc.
This one doesn't have that issue since it's located to the frame, but it looks like it hangs as low as the crossmember such that pancaking the x-member or setting it up into the frame wouldn't gain any clearance, but it's hard to tell give n the angles in the pics. Can anyone confirm that?